Summary of Contents for Pet Gear EASY STEP III EXTRA WIDE
Page 1
For The ON-THE-GO Pet ™ INSTRUCTION MANUAL EASY STEP III EXTRA WIDE PG9730XL To see our full line of products, visit us online at: www.petgearinc.com CUSTOMER SERVICE HELP DESK customerservice@petgearinc.com Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday...
PARTS LIST Check that you have all the parts shown BEFORE assembling your product. If any parts are missing, call Customer Service. Left Panel Right Panel Risers Center Support Panel Dowel Middle and Bottom Stairs Top Stair with Straight Side with Curved Side EASY STEP 1I1 EXTRA WIDE •...
Page 3
Step 1 With rubber grippers on the bottom, place right panel, part (B) on floor with PET GEAR Logo facing the floor and insert top stair, part (E). Keep the STRAIGHT SIDE toward the back and rug facing the top. Make sure there are no gaps between parts after inserted.
Page 4
ASSEMBLY INSTRUCTIONS Step 5 Insert bottom stair, part (F). Note the CURVED SIDE direction. Make sure there are no gaps between parts after inserting. Step 6 Curved Insert riser, part (C). Make sure there are no gaps Side between parts after inserting. Step 7 Insert center support panel, part (G), in middle row of holes.
Page 5
ASSEMBLY INSTRUCTIONS Step 8 Insert dowel, part (D), into hole and slide into notch on center support panel. Insert Dowel Notch Step 9 Attach left panel, part (A). Align all holes before pushing panel down. Make sure there are no gaps between parts after inserting.
Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive, destructive, immature or untrained animals. Do not use near an open or exposed flame. Failure to follow these warnings and the instructions could result in serious injury or death.