For all other devices
Please follow your devices' instructions on how to perform Bluetooth pairing.
b. The BTC460 car kit will automatically connect with your device once initial
setup is complete.
4. Charging USB Devices
Simply connect charging cable of mobile device to the USB port on the car kit
power adapter.
5. Button Functions
Function
Bluetooth pairing mode
Reconnect Bluetooth (in
standby mode)
Voice command
Voice dialing
(Siri for supported
iPhones)
8
Operation
Press and hold multifunction button for 3 to 4
seconds
Press multifunction button
To use this feature your mobile device must
support the voice dialing function.
1. Press and hold multifunction button for 1 to
2 seconds. You will hear a beep prompt.
2. Give voice command.
Kinivo BTC460 Bluetooth Car Kit