Racelogic RLACS290 Manual

Performance Box Touch Battery
A Battery (RLACS290) is available for use with
Performance Box Touch, allowing you to use the unit
without connecting to a power source. When installed,
the Power button on the battery can be used to turn
the unit on or off; to turn on or off, press and hold the
Power button for a few seconds.
If the power cable is plugged into the unit when the
battery is already attached to the unit, the unit will
automatically turn on.
The battery will provide a minimum of 6 hours of battery
life, however you can increase battery life to up to 9
hours by using minimum brightness
When the battery is installed and Performance Box
Touch is on, a Battery Status Indicator
is displayed on the top right of the screen, providing a
visual representation of the remaining battery charge.
The indicator is split in to 10 bars, each representing
10% of charge. When charging, a charging symbol will
appear over the battery symbol.
When the battery has less than 10% of charge
remaining, a warning screen will appear on screen for 10
seconds, to cancel the warning, press the screen.
Full battery specifications are available here.
settings.
https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Knowledge_Base/
Performance_Box_Touch_Battery
1