LG WTG1434 HF Series Owner's Manual page 26

Time Delay
Use this function to delay ending time. The
appliance will start automatically and finish after a
specified time interval.
1
Press the POWER button.
2
Select a washing programme.
3
Press the Time Delay button to set the
required delay ending time.
4
Press the START/PAUSE button.
NOTE
• This function is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
laundry and other factors.
• Reservation can be made up to 18 hours;
- 1 hour interval up to 3 - 12 hours
- 2 hours interval up to 12 - 18 hours
• This function cannot be set for less than 3 hours.
• To cancel this function, press Time Delay button
repeatedly until the reservation is cancelled or
press the POWER button to turn off and on
power.
Wi-Fi
When WLAN is connected to the appliance, the Wi-
Fi f icon on the control panel is lit.
• Press and hold Time Delay button for 3 seconds
to register the appliance in the LG ThinQ
application.
Remote Start
Use a smartphone to control your appliance
remotely.
• In order to use this function, refer to SMART
FUNCTIONS.
Hot Wash / Cold Wash
• Press the Hot Wash and/or Cold Wash buttons
to select hot water, cold water, or hot and cold
water (warm water).
• If Hot Wash is selected, washing will be done
with hot water and rinse will be done with cold
water.
• Under normal and standard user environments,
warm water will enter the drum when both hot
water and cold water are selected.
NOTE
• Delicates programme is cold water only. If hot
water is used, the laundry can be damaged.
• Both Hot Wash and Cold Wash are
automatically selected under Extra Rinse and
Tub Clean programmes.
Child Lock
Use this function to disable the controls. This
function can prevent children from changing
programmes or operating this appliance.
NOTE
• Once this function is set, all buttons are locked
except the POWER button.
• When the controls are locked,
remaining time are alternatively shown on the
display during the wash while the child lock is
engaged.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the Water Level and Spin
buttons simultaneously for 3 seconds to
activate this function.
OPERATION 25 EN
and the
CL