Software Installation - Rexing TIMUN Quick Manual

"TIMUN" REXING GT WHEEL - QUICK GUIDE
3. INSTALLATION TO PC
Rexing GT Steering Wheel requires a powered USB hub for connection to PC. Plug the supplied
coiled USB cable into the wheel on the one end and a powered hub on the other end. The
powered USB hub should be plugged directly into your PC back USB connector.

4. SOFTWARE INSTALLATION

All buttons and encoders are functional as soon as the steering wheel is connected to the PC. To
enable LCD and LED functionality, please follow these instructions:
4.1. Pushbuttons LEDs and RGB LEDs
Use Simdash software to configure your pushbutton and RGB LEDs. Simdash offers a wide variety
of choices to adapt your LEDs to any vehicle or simulation. In order to do this, first install and open
the Simdash app (https://www.symprojects.com/downloads).
Once the wheel is connected to your PC, a green light will appear in the Rexing.eu section within
the "Connected devices" menu. The "Configure" button in the Rexing.eu section opens the
Configuration Screen with the following options in General settings:
 General settings:
o Import Settings - opens profiles you previously saved
o Export Settings - enables you to save the current settings as a profile
o Clear all Settings - deletes the settings in the current profile
o Speed Limiter Lights - enables the setup (color and speed of alternating) of the Speed
Limiter Lights
o Quick Config - opens the Shift Lights Wizard (you will be notified that the Quick
Config function will delete the configuration of all the LEDs. It is OK to click Yes here if
you wish to (re)configure your LEDs).
4