Fujitsu ScanSnap S300M Getting Started Manual page 10

If you detect heat coming from the device or detect other problems such as
smoke, strange smells or noises, immediately turn off the scanner, and
disconnect its power plug from the power outlet, or unplug the USB bus
power cable from the computer.
Make sure that the smoking has stopped, and then contact the store where
you bought the scanner or an authorized FUJITSU scanner service provider.
Firmly insert the power plug and into the power outlet, or the USB bus power
cable into the USB port on the computer as far it can go. Not doing so might
cause electric shock or fire.
Do not place heavy objects on the scanner or use the scanner's top surface
for performing other work. Improper installation might cause injuries or
scanning failure.
When the scanner is not used for a long period, be sure to disconnect the
power plug from the power outlet, or disconnect the USB bus power cable
from the computer for safety. Not doing so might cause electric shock or fire.
In case you have dropped the scanner and any of the parts (e.g., cover) is
broken, disconnect the power plug from the power outlet, or disconnect the
USB bus power cable from the computer. Then, contact the store where you
bought the scanner or an authorized FUJITSU scanner service provider.
Do not insert or drop metal or flammable foreign objects into the scanner. Do
not scan wet documents or documents with paper clips or staples. Do not
splash or allow the scanner to get wet.
If foreign objects (water, small metal objects, liquids, etc.) get inside the
scanner, immediately turn off the scanner and disconnect the power plug
from the power outlet, or the USB bus power cable from the computer, and
disconnect the interface cable from the computer. Then, contact the store
where you bought the scanner or an authorized FUJITSU scanner service
provider. Pay particular attention to this warning in households where there
are small children.
Do not take apart or modify the scanner. The inside of the scanner contains
high-voltage components. Touching these components might cause fire or
electric shock.
To avoid injuries, do not place the scanner in an area where small children may
be able to reach.
Do not use the scanner while driving a car for safety. Accidents can happen.
9