Table of Contents
Advertisement
Pull out the heat exchanger cover
3.
by the handle.
Cleaning the base unit
You can remove any visible dirt in the
base unit.
CAUTION
Risk of cutting!
Touching sharp edges on the heat
exchanger may lead to cuts.
Do not touch the fins on the heat
▶
exchanger.
Open the base unit → Page 36.
1.
Use a soft brush to clean the heat
2.
exchanger cover.
Make sure that you remove all dirt
from the seal.
Cleaning and servicing en
Lift the middle tab on the insert
3.
slightly.
Pull the insert out horizontally.
4.
Clean the insert under running wa-
5.
ter and dry it off.
37
Advertisement
Table of Contents
