Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Control Panel
B
C
Figure 1. Control panel.
A. Thermal Overload Indicator Light: Orange
light will illuminate when welder has exceed-
ed duty cycle and needs to cool down (see
Welder Duty Cycle on Page 22). DO NOT
unplug machine when light is on, to allow fan
to cool machine down.
B. Wire Feed Speed Dial: Adjusts wire output
speed from welding gun.
C. MIN/MAX Power Switch: Switches machine
between its minimum and maximum output
amperage settings. MIN setting will yield a
60A output, and MAX will yield 70A output.
D. ON/OFF Switch: Turns machine ON and
OFF.
-4-
manual
BEFORE
A
D
Welding Gun
F
E
Figure 2. Welding gun components.
E. Nozzle: Protects contact tip.
F.
Contact Tip: Creates electrical connection
with welding wire as it is fed through.
G. Welding Gun: Controls welding wire out-
put and holds consumable electrode/welding
wire.
H. Trigger: Actuates wire feed driver.
Ground Clamp
I
Figure 3. Ground clamp.
I.
Ground Clamp: Connects workpiece to
welding circuit.
Model G0879 (Mfd. Since 6/19)
G
H
Advertisement
Table of Contents
