Fujitsu FI-6000NS Getting Started Manual page 33

No.
2 The DNS server or WINS server is not
functioning normally, or the scanner name has
not been registered in the DHCP or WINS
server.
3 A misconfigured firewall between the web
browser and the scanner is denying access.
4 In Microsoft® Internet Explorer, in the
"Tools" menu, "Internet Options", [Security]
tab, the security level for the corresponding
zone is set as "high", or in [Custom Level],
"Scripting", "Active Scripting" is set to
"Prompt" or "Disable".
■ Problems when Connecting to the Scanner using a Web Browser
If, when connecting to the scanner via a web browser the "Scripts are usually safe. Do you want to allow scripts to run?"
message appears, or if, when connecting to the scanner via a web browser, the "Login" screen appears but the buttons
can not be selected, try the following steps:
No.
1 In Microsoft® Internet Explorer, in the "Tools"
menu, "Internet Options", [Security] tab, the
security level for the corresponding zone is set as
"high", or in [Custom Level], "Scripting", "Active
Scripting" is set to "Prompt" or "Disable".
Problem
Problem
For the URL in the web browser, use the following IP address to
check the connection.
Example: http://192.168.1.200/
If it is possible to connect the scanner from the web with a specified
IP address, specify the scanner's IP address in the DNS or WINS
server. Also, check the DNS or WINS server settings on the web
browser terminal.
If there is a firewall between the computer running the web browser
and the scanner, check that it settings are not preventing access.
If the URL includes a scanner name, the scanner will be connected
using an Intranet Zone. If the URL includes an IP address, the
scanner will be connected using the Internet Zone.
In Microsoft® Internet Explorer, in the "Tools" menu, "Internet
Options", try the following settings for the corresponding zone.
•
To enable "Active Scripting", set in one of the following ways:
•
In the [Security] tab, set the required "Security level for this
zone" to "Medium".
•
In the [Security] tab, click the [Custom Level] button. Then,
set the "Scripting", "Active Scripting" to "Enable".
•
If connecting via the Internet zone, on the [Privacy] tab, set the
level to below "Medium High".
After the above settings have been performed, in "Temporary
Internet Files", press the [Delete Cookies] button to delete all
temporary internet files.
If the URL includes a scanner name, the scanner will be
connected using an Intranet Zone. If the URL includes an IP
address, the scanner will be connected using the Internet Zone.
In Microsoft® Internet Explorer, in the "Tools" menu, "Internet
Options", try the following settings for the corresponding zone.
•
To enable "Active Scripting", set in one of the following
ways:
•
In the [Security] tab, set the required "Security level for
this zone" to "Medium".
•
In the [Security] tab, click the [Custom Level] button.
Then, set the "Scripting", "Active Scripting" to "Enable".
•
If connecting via the Internet zone, on the [Privacy] tab, set
the level to below "Medium High".
•
After the above settings have been performed, in
"Temporary Internet Files", press the [Delete Cookies]
button to delete all temporary internet files.
Network Scanner fi-6000NS Getting Started
Action
Action
19