Advertisement
USING YOUR INDUCTION COOKTOP
TIMER
1.
Operation
Once the unit is plugged into an electrical outlet, place your
cookware on the glass top and press ON/OFF to turn the unit
on. The cooktop will automatically turn on to the Low setting.
Press
2.
Heat Settings
The cooktop has eight heat settings, from Low (1) to High (8).
To operate the heat control, press the button labelled HEAT on
the left hand side. (Indicator light labelled HEAT will illuminate).
To increase heat, press the
to lower the setting. The screen will indicate the current setting.
3.
Timer Function
To operate the timer, press the button labelled timer on the left
hand side. (Indicator light labelled TIMER will illuminate). Press
or
time. If you press and hold the up or down arrow, the timer will
advance rapidly. The timer can be adjusted to a maximum time
of 150 minutes. At the end of the timed cycle, the timer will
beep three times.
NOTE: Your induction cooktop runs for 180 minutes per use.
The timer runs for 150 minutes per use. If the cooktop has been
operating for more than 30 minutes and you set the timer for
150 minutes (for a total cooking time of more than 180 minutes),
the timer function will be shortened. The cooktop will turn itself
off after 180 minutes of use and the display will read OFF.
4.
Cookware detection: Unit will automatically turn off
after 30 seconds if cookware is not compatible.
5.
Unit automatically turns off when cookware exceeds
temperature limit. This prevents burning empty pots. Built-in
surge protection.
6.
When the unit is off, the fan may continue running for
a minute or more.
NOTE: If the unit is turned on and no cookware is put on
the cooking surface, the unit will beep and turn off after
®
HEAT
to adjust the heat level to your desired setting.
repeatedly to set the timer to your desired cooking
HEAT
TIMER
to the desired setting. Press
5
ON/OFF
Advertisement
