Power Consumption; Removing The Battery Pack - Gigabyte T1000 Series User Manual

I did not use my spare battery for months. I have problem in
recharging it.
If you happen to leave your battery pack to go through an
extended period of self-discharge, say more than three
months, the battery voltage level will become too low and
needs to be Pre-Charged (to bring the battery voltage level
high enough) before it automatically (for Li-Ion only) resumes
its normal Fast Charge.

2.4 Power Consumption

Select Power Options in the Control Panel or Power Mode in Smart
Manager (3.1 GIGABYTE Smart Manager Functions) to adjust
Power Consumption.

2.5 Removing the Battery Pack

This battery pack can easily be removed and replaced. Make sure
that the computer is properly shutdown before changing the battery
pack. If you would like to change the battery pack while power is
on, make sure this battery pack is not the only electrical source to
the system unit. Follow the steps below to remove the battery pack.
„ Make sure the system is properly shutdown.
„ Flip the system upside down as shown.
„ Push the battery lock to the unlock position as shown by #1.
„ Remove the battery pack as shown by #2.
To insert the battery pack, reverse the steps above.
T1000 SERIES USER'S MANUAL
2
1
13