Notices - Unitech Tashi MT65EM1 User Manual

the receiver.
Consult the dealer or an experienced radio/television technician for
help.
1. This Transmitter must not cohabitate or operate in conjunction with any
other antenna(s) or transmitter(s).
2. This equipment complies with FCC RF radiation exposure limits set forth
for an uncontrolled environment. To maintain compliance with FCC RF
exposure compliance requirements, avoid direct contact to the
transmitting antenna during transmission.
3. Any changes or modifications (including the antennas) made to this device
that are not expressly approved by the manufacturer may void the user's
authority to operate the equipment.
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or transmitter.
Canadian Compliance Statement
This Class B Digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte les exigences du Règlement
sur le matériel broilleur du Canada.
European Conformity Statement
Declaration of Conformity with Regard to the R&TTE 1999/5/EC and EMC 89/336/
EEC directives.
RoHS Statement

Notices

The unit is equipped with a Lithium-Ion battery pack. After extended storage
periods, however, the unit may not power-on without external power due to
battery discharge. In this case connect the unit to the power cable and
recharge the unit for about 6 hours to charge the battery to full capacity.
The battery supplies operational power to the unit for approximately 1 hour
Copyright 2011 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
This device conforms to RoHS (Restriction of Hazardous Substances)
European Union regulations that set maximum concentration limits on
hazardous materials used in electrical and electronic equipment.
ii