paws & pals PTAF-02 Instruction Manual

1. To set the current time:
•Press and hold "Set" button for 3 seconds, enter to the time
mode and [HOUR] icon start flashing, press
configure the current hour, press "OK" button to confirm; then
[MINUTE] icon is flashing, press button to adjust minutes
to current time, press "OK" button when finished.
Notes: Press and hold can fast forward or backward on
selection.
2. To set the frequency of meals:
•After finish time setting, [Numbers] icon for frequency of
MEALS will start flashing by pressing "Set" button, to
increase or decrease the frequency by pressing
1 means 1 meal per day
1-2 means 2 meals per day;
1-2-3 means 3 meals per day;
1-2-3-4 means 4 meals per day;
1-2-3-4-5 means 5 meals per day;
•After selection, confirmed by pressing "OK" button, LCD
automatically enters to feeding time & portion setting of each
meal.
•During the setting process, you could press "Manual" button
to exit and new parameters will be saved.
3. To set the feeding time and the portions of each meal:
Example A: To set 3 meals per day, and portion as 6 portions
– 5 portions – 7 portions, with steps below:
*Each meal serving is adjustable from 1 portion (10g) (~1/10
cup) to 20 portions (200g) (~2 cups).
1. First meal setting:
After you selected 1-2-3 and confirmed by pressing
"OK" button, LCD will display 1-2-3.
When digital "1" is flashing firstly, means start of the
first meal setting, meanwhile [HOUR] icon start flashing,
adjusted by pressing button and confirmed by pressing
"OK" button so that enter [MINUTE] setting, same way to by
pressing button and press "OK" button to confirm; After
these, [PORTION] icon will start flashing, pressing
to select 6 (6 portions) and confirmed by pressing "OK" button
2. Second meal setting
After above Step 1, digital "2" start flashing, means
start of the second meal setting now.
When [HOUR] icon start flashing, adjusted by
pressing button and confirmed by pressing "OK" button so
that enter [MINUTE] setting, same way to be adjusted by
pressing button and press "OK" button to confirm; After
these, [PORTION] icon will start by flashing, press
to select 5 (5 portions) and confirmed by pressing "OK"
button.
3. Third meal setting:
After above Step 2, digital "3" start flashing, means
start of the third meal setting now.
When [HOUR] icon start flashing, adjusted by
pressing button and confirmed by pressing "OK" button so
that enter to [MINUTE] setting, same way to be adjusted by
pressing button and press "OK" button to confirm; After
these, [PORTION] icon will start flashing, press
select 7 (7 portions) and confirmed by pressing "OK" button.
*To set other mode like 1-2-3-4-5 is same way as above
example A.
button to
button.
button
button
button to