Get Started; Charge Power; Switch The Player On Or Off; Automatic Standby And Shut-Down - Philips GoGear SA3SDV00 User Manual

Hide thumbs Also See for GoGear SA3SDV00:
Table of Contents

Advertisement

3 Get started

Charge power

SDV has a built-in battery that can be charged
through the USB port of a computer.
As shown, connect the SDV to a PC by using
the USB cable.
Note
When you connect SDV WR D FRPSXWHU \RX DUH EULHÁ\
prompted to select: [Charge & transfer] or [Charge
& play]. If no option is selected, [Charge & transfer]
applies.
To play the SDV when you charge power, select
[Charge & play].
8
EN
All manuals and user guides at all-guides.com
Battery level indication
‡ When the battery is low, the low battery
screen is displayed repeatedly.
‡ When the charging process is complete,
is displayed.
Note
Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
To conserve battery power and increase the
play time, do the following on SDV:
‡ Set the backlight timer to a low value (go to
> [Display settings] > [Backlight timer]).

Switch the player on or off

Press and hold
/
until the player is switched
on or off.

Automatic standby and shut-down

The player has an automatic standby and shut-
down feature that can save battery power.
After 10 minutes in idle mode (no play, no
button is pressed), the player switches off.

Advertisement

Table of Contents
loading

Table of Contents