Initial Setup - Panasonic TX-40JX800E Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

Indicator / Control panel
1
2 3
1 Ambient sensor
Senses brightness to adjust picture quality when
[Ambient Sensor] in the Picture menu is set to
[On].
2 Remote control signal receiver (for infrared
communication)
Do not place any objects between the TV remote
control signal receiver and remote control.
3 Power LED
Red:
Standby
Green:
On
Depending on the ambient brightness,
adjusts the brightness of LED to easy-to-view
levels automatically.
Orange:
Standby with some functions (recording, etc.)
active
The LED blinks when an infrared signal is received
from the remote control.
4 Input mode selection
Press repeatedly until you reach the desired mode.
5 Channel Up / Down
6 Volume Up / Down
7 Mains power On / Off switch
Use to switch the mains power.
To turn Off the apparatus completely, you must pull
the mains plug out of the mains socket.
[
]: Standby / On
18
English
4
5
6
7
Rear side of the TV

Initial Setup

When the TV is turned on for the first time, it will
automatically search for available TV channels and give
options to set up the TV.
These steps are not necessary if the setup has been
completed by your local dealer.
Please complete connections (p. 12 - 14) and
settings (if necessary) of the connected equipment
before starting Initial Setup. For information about
the settings for the connected equipment, read the
manual of the equipment.
1
Plug the TV into a live mains socket
and turn the power on
Takes a few seconds to be displayed.
2
Select the following items
Set up each item by following the on-screen instructions.
Example:
Select TV mode
"Home" mode is optimized for efficient energy usage for home use.
"Shop" mode is optimized to store demo with fixed settings.
How to use the remote control
Move the cursor
Access the item / store the setting
Return to the previous item (if available)
Select the language
Register (pair) the Bluetooth
Press and hold the volume down button and
the Google Assistant (voice control) button
simultaneously for 3 seconds.
Home
Shop
®
remote control

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents