Lan (Rj-45) Jack - Fujitsu Lifebook U810 User Manual

Connecting external video to the optional port replicator
1
If connecting directly to the optional port replicator, align the external video cable to the connector on the port
replicator (Figure 35).
2
Tighten the two hold-down screws, located on each side of the connector.

LAN (RJ-45) Jack

Note that in order to use the internal LAN device directly with the system, you must first attach the included
external video/LAN adapter cable. When connected with the optional port replicator, you can connect
directly to the dedicated LAN port on the port replicator
The LAN (RJ-45) jack is used for a 10Base-T/100Base-Tx Ethernet LAN connection. You may need to
configure your notebook to work with your particular network. (Please refer to your network administrator
for information on your network configuration.) To connect the LAN cable follow these easy steps:
External Monitor/
LAN Adapter Cable
LAN Cable
Figure 36. Connecting the LAN and Adapter
Figure 37. Connecting the LAN/Port Replicator
82 - Device Ports