Display Panel; Opening The Display Panel; Using The System As A Tablet - Fujitsu Lifebook T4220 User Manual

Tablet pc
Hide thumbs Also See for Lifebook T4220:
Table of Contents

Advertisement

L i f e B o o k T 4 2 0 0 S e r i e s T a b l e t P C - S e c t i o n T w o

Display Panel

Your LifeBook T4200 Series Tablet PC contains a display
panel that is backlit for easier viewing in bright environ-
ments. The convertible design of your Tablet PC allows
you to open the display fully, rotate it in either direction
180 degrees, and lay it face up on the keyboard. This
allows you to use the system as a tablet, much as you
would a pad of paper.

OPENING THE DISPLAY PANEL

1. Press the latch release button. This releases the
locking mechanism. While holding the latch release,
lift display cover.
2. Lift the display backwards, being careful not to
touch the screen with your fingers, until it is at a
comfortable viewing angle. (Figure 2-11)

USING THE SYSTEM AS A TABLET

If you would like to use the system as a tablet, perform
the following step
s.
The display can be rotated in either
direction, but when returning the system
to notebook mode, be sure to observe the
display rotation light. Rotate the system
display only in the direction indicated by
the light. Turning the display in the
incorrect direction could cause hinge
damage.
In the following step, be sure to position
the display perpendicular to the keyboard,
otherwise the keyboard or display cover
could get scratched.
1. Lift the display until it is perpendicular to the
keyboard. (Figure 2-14).
18
Figure 2-11. Opening the display
2. When the display is perpendicular to the keyboard,
rotate it 180 degrees in either direction (Figure 2-15)
so that it is facing backwards. (Figure 2-16)
3. Holding the top edge of the display panel, pull it
forward until it is lying nearly atop the keyboard.
4. Push the latch towards the display (See "A" in
Figure 2-12). The latch will pivot so the top latch
disappears, and the bottom latch appears (See "B" in
Figure 2-12). Holding the latch down, lay the display
flush against the system so that the latch engages.
You can now use your system as a tablet. (Figure 2-
17)
Top latch
Bottom latch
5. To return the system to notebook configuration,
repeat step 3 and 2. Be sure to turn the display in the
direction indicated by the display rotation light
(Figure 2-13).
Display
Panel
Latch
Latch
Release
Button
A
B
Figure 2-12. Latching/Unlatching
ROTATE
Figure 2-13. Display rotation light
Display Side

Advertisement

Table of Contents
loading

Table of Contents