Mainstays GAZ201500 Instruction Manual page 3

Connect all four side panel (A) with crossbeam (B).
Important: pay attention to difference of screw bolt size
STEP1:Use the screw bolt (K) to connect the crossbeam(B)
STEP 2: Use the screw bolt(H) connect the ribs (E) and the ribs(C)
SETP 4: Use screw bolt(H) to connect rib (C)
with side panel(A)
STEP5:Use the screw bolt (H) to connect rib (E)
with the crossbeam(B)
STEP6: Put the small canopy (J) onto ribs (F),
then fix the side panel bottom with 2 piece peg(G)
-3-
STEP3: Use screw bolt(H) to connect the ribs
(E) with the top of hub(F), and the ribs(C)
and (D) with the bottom of hub (F)
by turns
and canopy onto the ribs (C) and (D),