Pylontech LV-HUB-A Product Manual page 8

3) connect power cable of LV-HUB
4) Make sure all dipswitch is X0XX, then turn ON batteries.
5) After all batteries running and buzzer of master battery in group1 rings 3 times. Means all groups are
online.
6) Change the dip switch of master battery in group1 to X1XX. Then connect communication cable
between LV-HUB and master battery in group 1.
7) Then turn ON LV-HUB.
Detailed information please refer to manual of LV-HUB.
8 / 14
18BISV0501