Honda FourTrax Foreman TRX500FM1 2019 Owner's Manual page 228

If You Have a Flat Tire
Installation
1. Position the wheel.
2. Position the wheel nuts so that the tapered sides face the wheel
rim (2).
3. Hand-tighten the wheel nuts on the wheel, then lower the ATV
to the ground before tightening the nuts in a crisscross (rather
than circular) pattern to the specified torque:
47 lbf·ft (64 N·m, 6.5 kgf·m)
If a torque wrench was not used for installation, see your dealer as
soon as possible to verify proper assembly. Improper assembly may
lead to loss of braking capability.
218 Taking Care of the Unexpected