Fujitsu Lifebook T3010 Bios Manual page 24

L i f e B o o k T S e r i e s T a b l e t P C
The Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority Submenu is for setting the
order of checking of sources for the operating system.
Main
+Floppy Disk Drive
+Hard Disk Drive
CD-ROM Drive
F1 Help
ESC Exit
Table 16: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field Description
+Floppy Disk Drive The boot selections determine the order in which the BIOS searches for the operating system during a startup
sequence. To change the order highlight one source by using the [up] or [down] cursor keys and then press the
[+] or [-] key to change the order number for that source. Be sure to save your changed order when you exit the
+Hard Disk Drive
BIOS setup utility.
CD-ROM Drive
Exiting from Boot Menu
When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or
move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit menu. If you wish
to move to another menu, use the cursor keys.
PhoenixBIOS Setup Utility
Advanced Security
Boot Device Priority
Select Item -/Space
Select Menu Enter
Figure 16. Boot Device Priority Submenu
C A U T I O N
Be aware of the operating environment when booting
from a CD-ROM or you may overwrite files by mistake.
Power Savings Boot
Keys used to view or
configure devices:
<Enter> expands or
collapses devices with
a + or -.
<Ctrl+Enter> expands
all.
<Shift+1> enables or
disables a device.
<+>/<Space> or <->
moves the device up or
down.
<d> removes a device
that is not installed.
Change Values
Select Sub-Menu
24
Item Specific Help
F9 Setup Defaults
F10 Save and Exit