Setting Up Lifebook Security Panel; Passwords - Fujitsu Lifebook T1010 User Manual

2
Select the Buttons tab and select the button you would like to change from the list.
3
Click [Change] and open the drop down list in the Press: field.
4
Select the action you would like the button to perform. If you want to launch a program, click on Launch an
Application then browse to the location of the program.
5
Click [OK], then click [OK] again. The buttons will now perform the actions you have assigned to them.

Setting up LifeBook Security Panel

When you receive your Tablet PC, the security panel application is pre-installed without any passwords.
The following sections provide detailed information on your security panel, how to set, change or remove

passwords.

Numbered Buttons
Use these buttons to enter your password.
Enter Button
After entering the button strokes, push this button to enter the password into the Tablet PC.
Passwords
The user and supervisor password may be set on this Tablet PC. A supervisor password is typically the
same for all tablets and notebooks in a work group, office, or company to allow for system management.
Individual computers in a group environment should not use a common password. A password consists
of one to five button strokes plus the enter button. A valid stroke consists of pushing one or up to four
buttons simultaneously.
The following are valid button strokes:
• Pushing [4] by itself
• Pushing [2] and [3] at the same time
• Pushing [1], [2], and [4] at the same time
• Pushing [1], [2], [3], and [4] at the same time
58 - LifeBook Security/Tablet PC Buttons