Honda FourTrax Foreman TRX500FE2 2018 Owner's Manual page 238

If You Have a Flat Tyre
Installation
1. Position the wheel.
2. Position each wheel nut so that the tapered side faces the wheel
rim (2).
3. Hand-tighten the wheel nuts on the wheel, then lower the ATV
to the ground before tightening the nuts in a crisscross (rather
than circular) pattern to the specified torque:
64 N·m (6.5 kgf·m, 47 lbf·ft)
If a torque wrench was not used for installation, see your dealer as
soon as possible to verify proper assembly. Improper assembly may
lead to loss of braking capability.
228
Taking Care of the Unexpected