Hard Disk Security Submenu Of The Security Menu - Fujitsu Lifebook S7020 Bios Manual

L i f e B o o k S S e r i e s N o t e b o o k B I O S

Hard Disk Security Submenu of the Security Menu

The Hard Disk Security Submenu is for configuring hard disk security features.
Main
Serial ATA Port 0 Password Is:
Primary Master Password Is:
Set Serial ATA Port 0 Password
Set Primary Master Password
Password Entry on Boot:
F1 Help
ESC Exit
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Note: The fields on this submenu cannot be changed unless the Supervisor Password is set.
Menu Field Options
Serial ATA Port 0 ---
Password Is::
Primary Master ---
Password Is:
Set Serial ATA Port ---
0 Password
Set Primary ---
Master Password
■
Password Entry on
Boot:
■
PhoenixBIOS Setup Utility
Advanced Security
Hard Disk Security
Select Item
Select Menu
Figure 14. Hard Disk Security Submenu
Default
---
---
[Enter]
[Enter]
Disabled [Disabled]
Enabled
Power Savings
Clear
Not Available
[Enter]
[Enter]
[Disabled]
-/Space Change Values
Enter Select Sub-Menu
Description
A display-only field. Set is displayed when the Serial ATA Port 0 Password is set
and Clear when it is not.
A display-only field. Not Available is displayed.
Sets, changes or cancels Serial ATA Port 0 Password. The password may be up to
seven characters long and include only letters or numbers (no symbols). Passwords
are NOT case- sensitive. To cancel a password press the Enter key instead of enter-
ing characters in the Enter New Password field and in the Re-enter New Password
field. When a Serial ATA Port 0 Password is set it must be used to access the hard
disk. Data on the hard disk cannot be read on other systems.
Not currently available.
When this is disabled, it is not necessary to enter the password before booting.The
hard disk is still password-protected without entering a password.
22
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit