Attaching A Lens - Canon PowerShot A710 IS Advanced User's Manual

Attaching a Lens

1
Be sure that the camera is turned off.
2
Press the ring release button and hold it down,
and turn the ring in the direction of the arrow.
3
When the
mark on the ring are aligned, lift off the ring.
4
Detach the front section of the conversion
lens adapter (p. 111).
When using the close-up lens, attach the conversion lens adapter
to the camera with the front and rear sections combined.
5
Align the
adapter with the
and turn the adapter in the direction of the
arrows as far as the
To remove the conversion lens adapter, turn the adapter in the
opposite direction with holding down the ring release button.
112
mark on the camera and the
mark on the conversion lens
mark on the camera,
Ring Release Button
Ring
mark on the camera.