Using The Power Kits (Sold Separately) - Canon PowerShot A710 IS Advanced User's Manual

Using the Power Kits (Sold Separately)

Using Rechargeable Batteries
(Battery and Charger Kit CBK4-300)
This kit includes a battery charger and four rechargeable AA-size
NiMH (nickel metal hydride) batteries. Charge batteries as shown
below. Recharging is also possible using two batteries.
4 batteries
• After inserting the batteries, plug the charger (CB-5AH) into an
outlet, or attach the power cord to the charger (CB-5AHE, not
shown) and plug the other end into an outlet.
• Do not insert and charge additional batteries once charging has begun.
• The charge indicator blinks while charging, then remains lit when
charging is finished.
The CB-5AH/CB-5AHE battery charger can only be used
to charge Canon AA-size NiMH batteries NB-3AH and NB-
2AH. Please do not attempt to charge other type of battery.
Do not mix batteries with different purchase dates or
different charge states. When recharging batteries, always
recharge both of them at the same time.
Do not attempt to recharge fully charged batteries, as doing so
may reduce or impair battery performance. Also, do not charge
batteries for more than 24 consecutive hours.
Do not recharge batteries in enclosed areas that tend to
retain heat.
Do not recharge the batteries until the LCD monitor
displays the "Change the batteries" message. Repeatedly
recharging batteries before they become fully depleted
may cause batteries to lose capacity.
To a power outlet
Charge Indicator
To a power outlet
2 batteries
107