Advertisement
L i f e B o o k S S e r i e s N o t e b o o k B I O S
Secondary Master Submenu of the Main Menu
The Secondary Master submenu is for the internal CD-ROM drive. The drive type is displayed on this menu as well as
the Main menu. Your notebook auto-senses the characteristics of the internal CD-ROM Drive installed. You will not
need to modify these settings; they are displayed for your reference. Note that actual drive labels shown may vary.
Main
Secondary Master [MATSHITADVD-RAM UJ-802S -(SM)]
Type:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 3: Fields, Options and Defaults for the Primary Slave Submenu of the Main Menu
Menu Field
Options
Type:
• Auto
• None
• CD-ROM
• Hard Disk
Multi-Sector
• Disabled
Transfers:
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors
LBA Mode Con-
• Disabled
trol:
• Enabled
8
PhoenixBIOS Setup Utility
[Auto]
[Disabled]
[Disabled]
[Standard]
[Disabled]
Select Item
-/Space
Select Menu
Enter
Figure 3. Primary Slave Submenu
Default
[Auto]
[Disabled]
[Disabled]
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
Change Values
F9
Select
Sub-Menu
F10
Description
Selects the ATA/ATAPI device type. Select Auto to have the
type automatically identified by the BIOS at POST. If None
is selected, all of the following Set-up items do not appear.
Select CD-ROM or Hard Disk for appropriate drive type
installed at this connection.
This option cannot be changed when Auto is selected.
Specify the number of sectors per block for multiple sector
transfer.
Enables or disables Logical Block Addressing in place of
Cylinder, Head, Sector addressing. This option cannot be
changed when Auto is selected.
Setup Defaults
Save and Exit
Advertisement
