Advertisement
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. Follow
the instructions for Navigating Through the Setup Utility
to make any changes.
See Navigating through the Setup
Utility for more information.
F1
ESC
Table 15: Fields, Options and Defaults for the Boot Menu
Menu Field
Options
QuickBoot:
• Disabled
• Enabled
Boot-time
• Disabled
• Enabled
Diagnostic Screen:
Boot Menu:
• Disabled
• Enabled
Preboot Execution
• Disabled
• Enabled
Environment
Boot Device
• Selects Boot Device
Priority
Main
Advanced
Security
Quick Boot:
Boot Time Diagnostic Screen:
Boot Menu:
Preboot Execution Environment:
Boot Device Priority
Help
Select Item
Exit
Select Menu
Priority submenu
The following tables show the names of the menu fields
for the Boot menu and its submenu, all of the options
for each field, and the default settings. Also shown are a
description of the field's function and any special infor-
mation needed to help understand the field's use.
PhoenixBIOS Setup Utility
Boot
Info
[Enabled]
[Disabled]
[Enabled]
[Disabled]
-/Space
Change Values
Enter
Select
Sub-Menu
Figure 15. Boot Menu
Default
Description
[Enabled]
When disabled, all diagnostic tests are performed when the
system is booted up. If [Enabled] is set, some of the tests are
skipped in order to speed up the booting process.
[Disabled]
Turns on and off display of test results instead of Fujitsu logo
screen during Power On Self Test.
[Enabled]
This field is not active unless the Supervisor's Password has
been set. When disabled, access to the Boot Menu with the
[F12] key is disabled. When enabled, the Boot Menu is
enabled and the [F12] key will allow you to display it.
[Disabled]
Turns on and off boot from network server options.
—
This menu allows setting up the source for bootup.
S e c u r i t y M e n u
Exit
Item Specific Help
[Disabled]
All diagnostic tests
will be done.
[Enabled]
Some diagnostic tests
may be skipped while
booting to speed up.
F9
Setup Defaults
F10
Save and Exit
23
Advertisement
