Fujitsu Lifebook S6010 User Manual page 111

2. Double-click the [Network and Dial-up
Connections] icon. The [Network and Dial-up
Connections] window appears.
3. Right click the [Local Area Connection], then click
[Properties] from the menu that appears. The [Local
Area Connection Properties] window appears.
P O I N T
More than one network adapter is installed in your
system if more than one [Local Area Connection] entry
is displayed. In this case, select the [Local Area
Connection] entry with [Intersil PRISM Wireless LAN
PCI Card] displayed under [Device Name].
4. Perform the following steps.
Click [Internet Protocol (TCP/IP)].
I
Click [Properties]. The [Internet Protocol (TCP/IP)
I
Properties] window appears.
5. Set an IP address as indicated in Table 9. Ask your
network administrator to check the setting.
Item
For AdHoc Set the IP address and subnet mask:
Network
Click [Use the following IP address],
and enter a value for [IP address] and
[Subnet mask].
Refer to "About IP Addresses" on
page 27 to set an IP address and
subnet mask.
For Select [Obtain an IP address
Infrastructure automatically]:
Network
For the DNS server, select [Obtain
DNS server address automatically].
For the IP address, DNS server, and
default gateway, follow the network
administrator's instructions, if any.
Table 9: Setting an IP Address
6. Click [OK]. The [Local Area Connection Properties]
window appears again.
7. Click [OK]. When a message appears prompting you
to restart the computer, click [Yes].
Checking the full computer name and workgroup
1. Click [Start] -> [Settings] -> [Control Panel].
2. Double-click the [System] icon. [System Properties]
appears.
3. Click the [Network Identification] tab.
4. Check [Full computer name] and [Workgroup]. Ask
your network administrator and check the setting.
Description
W I r e l e s s L A N U s e r ' s G u i d e
Item
Full A name to identify the computer on
Computer the network. You can specify any
Name name to each computer.
For easier identification, use the model
name or user name.
Workgroup A name for the network group:
AdHoc Network:
I
Specify the same name to all com-
puters within the same network.
Infrastructure Network: Specify a
I
workgroup name to connect to.
To change the setting, click
[Properties], and follow the instruc-
tions on the screen. [System Proper-
ties] appears again.
Table 10: Checking computer name and workgroup
5. Click [OK]. When a message appears prompting you
to restart the computer, click [Yes].
Sharing
In this section, you set sharing of the drive, folder, and
printer.
You only need to set this when you are sharing files or a
printer with other computers on the network.
When you share a drive, folder, or printer, you can use
them from any computer on the network.
Setting [File and Printer Sharing for Microsoft
Networks]
1. Click [Start] -> [Settings] -> [Control Panel].
2. Double-click the [Network and Dial-up
Connections] icon. The [Network and Dial-up
Connections] windows appears.
3. Right click the [Local Area Connection], then click
[Properties] from the menu that appears. [Local
Area Connection Properties] appears.
P O I N T
More than one network adapter is installed in your
system if more than one [Local Area Connection] entry
is displayed. In this case, select the [Local Area Connec-
tion] entry with [Intersil PRISM Wireless LAN PCI Card]
displayed under [Device Name].
Description
103