Location Of Controls - Toshiba 51H94 Service Manual

Integrated hd projection television
Hide thumbs Also See for 51H94:
Table of Contents

Advertisement

FRONT
Press/lift to open
control panel door.
2
3
POWER
1
Remote control sensor
the remote control toward this area of the TV screen.
2
— Press to turn the TV on and off.
POWER
3
— When green lights solid (not
Red and Green LEDs
blinking), it indicates that the TV power cord is plugged in
and the power is OFF. This is called standby mode.
NOTE: When you first plug in the power cord, the green LED
will blink 3 times. After approximately 30 seconds, the green
LED will light continuously, at which point you can press
POWER to turn ON the TV.
When red lights solid (not blinking), it indicates that the
TV power cord is plugged in and the POWER is ON.
4
— Press to access the menu system.
MENU
When a menu is on-screen or the TV Guide On Screen
program guide is open, this button functions as the ENTER
button.
5
x • — When no menu is on-screen, these
VOLUME
buttons adjust the volume level. When a menu is on-screen,
these buttons function as left/right menu navigation
buttons.
All manuals and user guides at all-guides.com
LOCATION OF CONROLS
1
4
5
6
7 8 9
— Point
(behind the screen)
Remote control effective range
0
PUSH TO
REMOVE
6
yz — When no menu is on-screen, these
CHANNEL
buttons change the channel (programmed channels only.
When a menu is on-screen, these buttons function
as up/down menu navigation buttons.
7
— Press to close an on-screen menu instantly.
EXIT
8
— Repeatedly press to change the source you are
TV/VIDEO
viewing (ANT 1, ANT 2, VIDEO 1, VIDEO 2, VIDEO 3,
HDMI, ColorStream HD1, ColorStream HD2).
9
— Press to automatically adjust the color
®
TouchFocus
convergence.
0
Memory card slots
SmartMedia,
MMC, Memory Stick,
one of the memory card slots to view JPEG files (such as
photos) as a "slide show" on your TV .
— The front panel A/V connections are referred
VIDEO-3
to as "VIDEO 3" and include standard A/V connections
plus optional S-video. (The VIDEO 1 and VIDEO 2 A/V
connections are on the TV's back panel.)
!™
— If the TV stops responding to the controls on
RESET
the remote control or TV front panel and you cannot turn
off the TV, press this button to reset the TV.
NOTE: The RESET button is recessed, so you will need to use
the end of a paper clip or similar object to press the button.
- 21 -
!™
L/MONO
R
DO NOT REMOVE
MEMORY CARD
WHILE VIEWING
PICTURES.
— Insert a memory card (SD,
CompactFlash
®
) into

Advertisement

Table of Contents
loading

This manual is also suitable for:

57h94

Table of Contents