Table of Contents
Advertisement
The following parameters will be available for configuration:
Wireless Band: Displays the wireless band being
Enable Wireless: Check the box to enable the wireless
Wireless Network Name: The Service Set Identifier (SSID) is the name of your wireless network. Create a name using up to 32 characters. The
802.11 Mode: Here the user can manually select the preferred frequency band to use for this wireless network.
Enable Auto Channel Scan: The auto channel selection setting can be selected to allow this device to choose the channel with the least
Wireless Channel: By default the channel is set to 1. The Channel can be changed to fit the channel setting for an existing wireless
Transmission Rate: Select the transmit rate. It is strongly suggested to select Best (Automatic) for best performance.
Channel Width: When using the 802.11n frequency band, the user have an option to choose between a 20MHz or 20/40MHz
Visibility Status: The Invisible option allows you to hide your wireless network. When this option is set to Visible, your wireless
D-Link DIR-845L User Manual
configured. In this option we find that the
following parameters will be regarding the
2.4GHz band.
function. If you do not want to use
wireless, uncheck the box to disable all
the wireless functions. Select the time
frame that you would like your wireless
network enabled. The schedule may be set
to Always. Any schedule you create will be
available in the drop-down menu. Click
New Schedule to create a new schedule.
SSID is case-sensitive. Enable Auto Channel
amount of interference.
network or to customize the wireless network. If you enable Auto Channel Selection, this option will be greyed out.
bandwidth.
network name is broadcasted to anyone within the range of your signal. If you are not using encryption then they
could connect to your network. When Invisible mode is enabled, you must enter the Wireless Network Name (SSID)
on the client manually to connect to the network.
50
Advertisement
Table of Contents
