Gear Head LM7000W User Manual page 5

3. Establish a Connection:
a. Press the Connect Button at the bottom of the Wireless USB Receiver. Your mouse will establish a connection with the receiver
and is ready to be used. If a connection is not established, there might be a high level of surrounding interference, press the
Connect Button on the bottom of your Mouse. The LED Indicator above the Power Switch will turn on to indicate it is scanning
for a connection. The LED Indicator will turn off after a connection has been established.
b. The LED Connection Indicator on the Wireless USB Receiver indicates the status of the connection between your Mouse
and your computer:
Status Description
LED Off No Power/Not Connected To Computer
Solid Red Connected/No Activity Detected
Blinking Red Scanning For Connection
Flashing Red Your Mouse Is In Active Mode
5