Emergency Dvd/Cd-Rom Tray Release; Using The Optical Player Software - Fujitsu Lifebook N5010 User Manual

cygnus.book Page 37 Tuesday, September 30, 2003 4:22 PM
a.
c.

EMERGENCY DVD/CD-ROM TRAY RELEASE

If for some reason the eject button fails, you can open
the media tray with a paper clip inserted into the eject
hole in the far right side of the front of the tray.
Straighten one side of a paper clip and push it gently into
the hole. The tray will pop out a short distance.
Figure 4-7. Emergency Removal of a CD/DVD

USING THE OPTICAL PLAYER SOFTWARE

Prior to using your optical drive, you must
install the optical player software. For details
on using your optical player software, refer
to the software Help file.
Starting a DVD Movie
1. Insert the DVD movie into the optical drive of your
notebook. If the CD AutoRun feature activates,
skip Step 2.
2. The first time you insert a movie into the DVD/CD-
RW tray, you will be prompted to select what you
want the system to do when discs are inserted (e.g.,
start automatically or wait for a prompt). Until you
make a selection, you will receive the same prompt
whenever you insert a disc.
U s e r - I n s t a l l a b l e F e a t u r e s
Figure 4-6. Loading Media
3. Click OK to close the About DVD Player
Performance dialog box and the movie will begin.
Opening the DVD/CD-RW Drive Control Panel
With most DVD-ROMs, you have the option of altering
how the movie should play and what you wish to view.
You can do this by using the DVD/CD-RW Combo
Drive control panel and the mouse.
1. Right-click on the movie screen to open a dropdown
menu for options.
2. Select View -> Player for all the controls available.
This will open the control panel into the bottom of
the screen.
Using the Optical Drive Control Panel
The optical drive software allows you to watch the movie
much like a VCR player. You have the option to pause,
rewind, fast-forward and stop the movie at any point.
1. To Pause the movie, click the
2. To Rewind the movie, click the
to a specific portion of the movie, or the
to return to the opening screen.
3. To Fast-forward the movie, click the
forward to a specific portion of the movie, or the
button to jump to the ending credits.
4. To Stop the movie, click the
Exiting the Optical Player
1. Click on the located in the upper right corner of
the title bar. This opens an Optical Player dialog box.
2. Click Yes to stop and exit the movie, or No to close
the Optical Player dialog and return to the movie.
b.
d.
button.
button to rewind
button
button to
button.
37