Figure 28- Cascaded Configuration With Multi-User Slaves; Figure 29- Master-To-Slave Device Cable Connections- Single-User Switches - Network Technologies Incorporated RACKMUX Series Installation And Operation Manual

NTI RACKMUX KVM Drawer with UNIMUX Switch
USER 1
USER PORT
UNIMUX-1X4
MASTER
CPU PORTS
USBVEXT-xx-MM USBVEXT-xx-MM
(USER
PORT 1)
USER PORTS
UNIMUX-4X8
SLAVE
CPU PORTS
USBVEXT-xx-MM
(8 CABLES)
CPU1 CPU 8
FYI: Any USER and MONITOR ports on a multi-user switch connected as a slave that do not get connected to the master
can be connected to by users (for example users 5-8 in Figure 28). Users connected to a slave downstream from the
master will control only the CPUs directly connected to that slave switch (i.e. users 5 and 6 in Figure 28 above can only
control CPUs 25-40).
USER 2
USER PORT
UNIMUX-1X4
MASTER
CPU PORTS
(TO USER PORT 2 ON
SLAVES 1-4)
(USER
PORT 1)
USER PORTS
UNIMUX-4X8
SLAVE
CPU PORTS
USBVEXT-xx-MM
(8 CABLES)
CPU9 CPU 16

Figure 28- Cascaded configuration with multi-user slaves

Figure 29- Master-to-slave device cable connections- single-user switches

USER 3
USER PORT
UNIMUX-1X4
MASTER
CPU PORTS
(TO USER PORT 3 ON (TO USER PORT 4 ON
SLAVES 1-4)
USBVEXT-xx-MM
(USER
PORT 1)
USER PORTS
UNIMUX-4X8
SLAVE
CPU PORTS
USBVEXT-xx-MM
(8 CABLES)
CPU17
CPU 24
24
USER 4
USER PORT
Users 5-8 only have access to CPUs 25-40.
UNIMUX-1X4
Users 1-4 have access to all CPUs
MASTER
CPU PORTS
SLAVES 1-4)
USBVEXT-xx-MM
USER 6
USER 5
(USER
PORT 1)
USER PORTS
UNIMUX-8X16
SLAVE
CPU PORTS
USBVEXT-xx-MM
(16 CABLES)
CPU 25
USER 8
USER 7
CPU 40