Fujitsu LifeBook E-6541 User Manual page 33

If you swapped or inserted your Flexible Bay device
with My Computer or Windows Explorer opened,
click View, and then click Refresh.
The Copy Disk utility for the built-in SuperDisk
cannot be used if BayManager is installed. To work
around this limitation, perform the following steps:
(Note that in order to copy SuperDisk media, your
LifeBook's memory size must be greater than the size
of the SuperDisk media.)
Create a folder on your C: drive to which you will
copy the files.
Open the SuperDisk files using my Computer or
Windows Explorer.
Click Edit/Select All.
Copy all all the files to the newly-created folder.
Swap the disk with an empty formatted disk.
Copy all the files from the new folder to the empty
disk.
If BayManager is installed in your LifeBook and you
insert a SuperDisk into its drive on the Flexible Bay,
the disk will indicate Removable Disk on the screen;
this phenomenon does not affect the LifeBook's
operation adversely.
If you are running the optional Adaptec Easy CD
Creator, and want to swap or remove the current
multi-bay device, close Adaptec Easy CD Creator, wait
for about 30 seconds, then do the swapping or
removal.
After you swap or insert your Flexible Bay device, the
DVD Autorun might stop. To work around this
problem, double-click on My Computer, then double-
click the icon for DVD drive.
If a LifeBook with an external USB FDD connected is
put on Standby, the drive letter for the FDD might
change (from A) after the computer is brought out of
the power saving state. This phenomenon does not
affect operations adversely.
If Windows is started on a LifeBook with an external
USB FDD connected, an icon for the FDD might not
appear in My Computer or Windows Explorer. If you
encounter this problem, remove the FDD from your
LifeBook then reconnect it.
If the FDD (A:) is not shown in My Computer or
Windows Explorer even if the FDD is connected,
please execute [Insert] by using BayManager.
Hot-swapping under Windows 2000 Professional
Under Windows 2000 Professional, hot-swapping is
provided through the Unplug or Eject Hardware utility.
The icon for the utility appears on the taskbar. Refer to
your Windows manual on using this feature.
G e t t i n g t o K n o w Y o u r L i f e B o o k
25