Table of Contents
Advertisement
Rev. A, January 2021
4.6
Replacing Blades
a. With the cover removed, use a 2mm allen wrench to remove the 3 flat head screws that
hold the blade to the main body (See Item 1, Figure 4.4). Note, there are a total of 6 screws
that fasten the left and right blades to the main body. Warning, these blades are very sharp,
wear gloves when removing fasteners and ensure the lever assembly is in the upright
position prior to changing the blades (See figure 4.4).
b. For all replacement part numbers, refer to the Bone-Cutter Parts ID Manual.
1
Bone-Cutter Operator's Manual
Figure 4.4
8
Advertisement
Table of Contents
