True TMC-49-HC Installation Manual page 20

TRUE
milk coolers
LAE ELECTRONIC TEMPERATURE CONTROLS
LAE Control
HOW TO DISPLAY PROBE TEMPERATURES:
DISPLAYING TEMPERATURE PROBES, T1, T2, T3:
WHY: To display temperature probe readings in different locations of the
cabinet.
Also, display may show an average cabinet temperature and not a specific probe
temperature.
STEP 1 - To display T1 temperature, press and release the info button
"t1" will appear. See image 1.
STEP 2 - Press and hold the info button
T1 Probe. See image 2.
STEP 3 - By releasing the info button
info button to display the temperature of the T2 probe.
STEP 4 - By releasing the info button
hold the info button
the T3 probe. (If probe T3 is not activated, "t3" will not appear of
the display.)
DISPLAY CODES
DISPLAY
Defrost in progress
Controller in stand-by
Door open alarm
Instant Probe 1 temperature
Instant Probe 2 temperature
Instant Probe 3 temperature
Minutes of the Real Time Clock
Hours of the Real Time Clock
20
. This is the temperature of the
, "t2" will appear. Press and hold the
again, "t3" will appear. Press and
to display the temperature of
Info / Set Point
Button
Manual Activation
Up Button
.
Room high temperature alarm
Room low temperature alarm
Probe T1 failure
Probe T2 failure
Probe T3 failure
Maximum probe 1 temperature recorded
Minimum probe 1 temperature recorded
Keypad state lock
. .
www truemfg com
Manual Defrost /
Down Button
Stand-By
Button
1
2