Subscribe to Our Youtube Channel
Related Manuals for CMP Wireless TROLLMaster PRO3+
Summary of Contents for CMP Wireless TROLLMaster PRO3+
- Page 1 CALL: 1.604.940.2010 EMAIL: sales@cmpgroup.net MAIL: TROLLMASTER 7733 Progress Way Delta, British Columbia Canada V4G 1A3 FAX: 1.604.952.2650...
- Page 2 Connections cont’d Congratulations on your purchase of the Congratulations on your purchase of the Wireless TROLLMaster PRO3+. This addition to Wireless TROLLMaster PRO3+. This addition to the TROLLMaster lineup will allow you to control both your trolling speed and direction the TROLLMaster lineup will allow you to Wired Remote Test Plug control both your trolling speed and direction...
-
Page 3: Quick Start
Wired Remote Test Plug PRO3+ This plug is used in conjunction with a wired test remote to verify function of the receiver. (sold separately) Pairing Button Pushing this button will pair your remote to your receiver. Push this button once and the Activity light will be solid. -
Page 4: Remote Functions
Throttle Control Remote Functions REMOTE FUNCTIONS You have a range of 1- your actual GPS speed speed reading for you Speed Adjustment There are two button Backlight LCD Screen Power your speed and a turt On/Off the corresponding bu Idle/Resume Throttle If you hold down on e Faster... -
Page 5: Throttle Control
Throttle Control You have a range of 1-250 to adjust your speed. This does not correlate to your actual GPS speed. Use an external GPS in order to get an accurate speed reading for your situation. Speed Adjustment There are two buttons to control your speed, A rabbit icon for increasing your speed and a turtle icon to decrease your speed. -
Page 6: Install Instructions
INSTALL INSTRUCTIONS PRO3+ Packaged in the hardware kit that you purchased with your is an install manual that explains in detail how to Install your servo and throttle rod. Your wireless receiver needs to be placed in a location where it will not be exposed to constant water exposure. -
Page 7: Troubleshooting
TROUBLESHOOTING Inputs to remote do not cause the servo or steering to respond Double check that your battery that is charged. Verify that your power cables are connected securely. Try pairing the remote one more time and ensure that the Activity Light comes on to verify power. -
Page 8: Service And Warranty
If the service required is covered by warranty, you must obtain a Return Authorization number from CMP Group . The unit will be repaired or replaced with new or factory rebuilt parts at no charge. The defective components must he returned to the address specified, with shipping charges prepaid.
Need help?
Do you have a question about the Wireless TROLLMaster PRO3+ and is the answer not in the manual?
Questions and answers