Fujitsu Lifebook C1320D Software Manual page 6

L i f e B o o k C S e r i e s B I O S
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field Options
Maximum Display only
Capacity:
Multi-Sector Disabled
Transfers:
2 Sectors
4 Sectors
8 Sectors
16 Sectors
32 Sectors
64 Sectors
128 Sectors
LBA Mode Enabled
Control:
Disabled
PIO Transfer Standard
Mode:
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
DMA Transfer Disabled
Mode:
Multiword
DMA 1
Multiword
DMA 2
Ultra DMA 0
Ultra DMA 1
Ultra DMA 2
C A U T I O N
A bootable CD-ROM may have either a floppy disk for-
mat or a hard drive format. When the bootable CD-
ROM is used the drive allocations change automatically
without changing the BIOS setup. If a floppy disk for-
mat CD-ROM is used the CD-ROM becomes Drive A.
The CD-ROM will only take drive C: (hard drive format)
if the internal hard drive is not present or is disabled.
The bootable CD-ROM can never use a C: designation
if a formatted internal hard drive is present since the C:
designator is always reserved for the internal hard
drive.The boot sequence ignores the new drive designa-
tions, however, your application software will use the
new designations.
6
Default Description
–— Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Hard Disk is selected.
[16 Sectors] This option cannot be changed when Auto is selected. Specify the
number of sectors per block for multiple sector transfer. MAX refers
to the size the disk returns when required.
[Enabled] Enables or disables logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when
Auto is selected.
[Fast PI0 4] Selects the method for moving data to/from the drive. Autotype
the drive to select the optimum transfer mode. This option cannot
be changed when Auto is selected. Multi-word DMA is
automatically set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3,
and set to mode 2 for Fast PIO 4 / DMA.
[Ultra DMA 2] Selects the method for moving data to/from the drive. Autotype
the drive to select the optimum transfer mode. This option cannot
be changed when Auto is selected.
Be careful of the operating environment when booting
from a CD-ROM or you may overwrite files by mistake.
C A U T I O N