Fujitsu Lifebook C1320D Software Manual page 30

L i f e B o o k C S e r i e s B I O S
Main
Power Savings:
Hard Disk Timeout:
Display Timeout:
Standby Timeout:
Auto Suspend Timeout:
Suspend Mode:
Auto Save To Disk:
Resume On Modem Ring:
Resume On Time:
Resume Time:
Advanced Features
F1 Help
ESC Exit
Table 17: Fields, Options and Defaults for the Power Menu
Menu field Options
Power Savings: Disabled
Customized
Maximum
Power Savings
Maximum
Performance
Hard Disk Timeout: 30 seconds to 20
Minutes
Off
Display Timeout: 2 to 20 Minutes
Off
Standby Timeout: 1 to 16 Minutes
Off
30
PhoenixBIOS Setup Utility
Advanced Security
[Customized]
[Off]
[Off]
[4 Minutes]
[15 Minutes]
[Suspend]
[Off]
[Off]
[Off]
[00:00:00]
Select Item -/Space
Select Menu Enter
Figure 17 Power Menu
Default
[Customized]
[Off]
[Off]
[4 Minutes]
Power Boot Info
Item Specific Help
Select Power Management
Mode. Choosing modes
changes system power
management settings.
Maximum Power Savings
conserves the greatest
amount of system power
while Maximum
Performance conserves
power but allows
greatest system
performance. To alter
these setting, choose
Customize. To turn off
power management,
choose Disabled.
Change Values
Select Sub-Menu
Description
Sets the power savings parameters to a factory installed
combination of parameters, a custom set of parameters set
by you or no power saving features.
Sets the length of time that the hard drive can be inactive before
your notebook automatically turns off the power to the hard drive
controller and drive motor. If you choose a factory installed
combination of parameters this field will display the setting. If
you choose to customize the parameters you will be able to set
this yourself. The options available vary from Off, which has no
inactivity shutoff, to 20 minutes.
Sets the length of time without any user input device activity before
the display is turned off. If you choose a factory combination of
parameters, this field will display the setting. If you choose to
customize the parameters, you will be able to set this yourself.
Off has no inactivity shutoff.
Sets the length of time without any user input device activity
before the CPU is set to half speed and the display and the hard
drive are turned off. If you choose a factory combination of
parameters this field will display the setting. If you choose to
customize the parameters you will be able to set this yourself.
Exit
F9 Setup Defaults
F10 Save and Exit