Fujitsu Lifebook AH572 User Manual page 71

6
Align the memory upgrade module with the component side up. Align the connector edge of the memory
upgrade module with the connector slot in the compartment. Be sure the alignment keys line up with those in
the slot.
Figure 25. Opening the Memory Compartment
7
Insert the memory upgrade module at a 45° angle. Press the connector edge of the module firmly down and
into the connector until it lodges under the retaining clip. You'll hear a click when it is properly in place.
8
Replace the cover and reinstall the screws.
T
HE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR NOTEBOOK
O
NCE IT IS INSTALLED
CAPACITY
,
YOU CAN LEAVE IT IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM MEMORY
.
65 - Memory Upgrade Module
Retainer
Clip
Alignment Key
Figure 26. Installing a Memory Module
Retainer Clip
.