Fujitsu Lifebook B112 User Manual page 77

Table 4-5 Fields, Options and Defaults for the I/O Device Configuration Submenu
Menu Field Options
Serial port B: Auto; Disabled; Enabled.
Mode: (Displayed if FIR; IrDA.
serial port B is not
disabled.)
Base I/O address: 3F8; 2F8; 3E8; 2E8.
(Displayed only when
serial port B is set
to Enabled.)
Interrupt: (Displayed only IRQ 3; IRQ 4;
when serial port B is set IRQ 10; IRQ 11.
to Enabled.)
Base I/O address: 100; 108; 110; 118.
(Displayed only when serial
port B is set to Enabled
and Mode is set to FIR.)
C o n f i g u r i n g Y o u r L i f e B o o k B 1 1 2
Default Description
[Enabled] Selects configuration method for serial port B. Serial port B is the
serial port which is the infrared port. The selection Auto makes
the BIOS or operating system choose the configuration except for
mode. The Disabled selection means that serial port B is not con-
figured for use. The Enabled selection provides for configuration
setup by the user. When Enabled is selected the choices for setting
Base I/O address and interrupt level are displayed.
[FIR] Selects the speed and format of the infrared port.
[2E8] Selects the Base I/O address for serial port B.
[IRQ 3] Sets the interrupt level for serial port B.
[118] Sets the Base I/O address for the FIR mode operation.
L i f e B o o k B 1 1 2 f r o m F u j i t s u
63