Fujitsu FI-6750S User Manual page 54

S e c t i o n T w o
The power management toolbar has ten power
profile choices and six activation choices.
When you switch to AC powered operation the
PowerPanel toolbar will automatically change to
indicate AC power operation and will show the
AC Power profile as active.
The profiles are groups of system settings
designed to fit power operation to specific user
operating conditions. The activations are short-
cut ways to turn on specific power management
features of your notebook. Some of the profiles
can be edited and saved from the PowerPanel
application, some can be edited and saved from
the BIOS setup utility and only viewed from
PowerPanel,and some are factory set and can
only be viewed from either PowerPanel or the
BIOS setup utility.
44
The profile choices are:
(This group is factory set.)
Maximum Battery Life.
Maximum Performance.
Power Management Off.
(This one is set only from the
BIOS setup utility.)
Custom Settings.
(This group is set from PowerPanel.)
Presentation.
Green PC.
AC Power.
Word Processing.
Communication.
Games.
The activation choices are:
System Suspend.
System Save-to-Disk.
System Standby.
Hard Disk Standby.
Modem Power Toggle.
Video Standby.
The factory set Maximum Battery Life profile
is designed around trade offs of performance
and battery life. For truly maximum battery life
keep the display and volume levels as low as
possible and use the custom settings recom-
mended in Section Three on page 91.
P O I N T
The AC Power profile is activated
automatically when a power adapter is
being used, unless it is overridden by
another selection made after the adapter
became active. It can be reactivated by
selecting it or activated by selection,
even when operating only on
battery power.