Sony Trinitron KV-2199XDK Service Manual page 11

Presetting channels manually
1
Press SELECT until
SELECT
"MANUAL PROGRAM"
appears.
2
Press + or –.
3
Press PROGR +/– or the
PROGR
number buttons until the
desired program number
appears.
4
Press + or – until the
desired channel picture
appears.
5
Press SELECT.
SELECT
To change the TV system setting
If the picture or sound is abnormal when receiving programs through the ˘ (antenna)
terminal.
(1) Press SELECT until "TV SYS" appears.
TV SYS: B/G
(2) Press + or – to select the appropriate TV system until the picture or sound quality
is optimal.
B/G D/K
Presetting channels (continued)
To change the color system setting
If the color is abnormal when receiving programs through the
˘ (antenna) terminal or the ... (video input) jack
MANUAL PROGRAM
(1) Press SELECT until "COL SYS" appears.
VHF LOW B/G
(2) Press + or – to select the appropriate color system until the color is optimal.
1 2 3
4 5
6
or
7 8 9
-/-- 0 Skipping program numbers
1
1
2
3
4
5
To preset the skipped program number again
Preset the channel automatically or manually.
To use the fine tuning (FINE) function
The fine tuning (FINE) function may help to reduce the following problems: double
images and lines moving across the TV screen.
You can use the fine tuning function as below:
(1) Select the program number you want to adjust.
(2) Press SELECT until "MANUAL PROGRAM" appears on the screen.
(3) Press + or – on the remote control once.
(4) Press
(5) Press + or – continuously until the above problems are minimized.
continued
(6) Press SELECT to return to normal screen.
9 10
Using Your New TV Using Your New TV
COL SYS : AUTO
AUTO PAL SECAM NTSC 3.58 NTSC 4.43
Tip
• Normally set "COL SYS" to "AUTO".
Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.
Press SELECT until "MANUAL PROGRAM" appears.
Press + or –.
Press PIC MODE.
Press SELECT.
Tip
¸
• You can also use SELECT and +/– on the TV to preset channels and
skip program numbers.
to display "FINE" on the screen.
The + or – icon on the screen flashes while tuning.