Panasonic 2-LINE KX-TG9551 Series Operating Instructions Manual page 49

To activate this feature, you must edit an entry in
the caller list, then call that number. After that,
phone numbers from that caller's area code are
edited automatically.
This feature can be set for each unit (page 42).
The default setting is "On".
Note:
R Phone numbers from the 4 most recently edited
area codes are automatically edited.
Erasing selected caller information
Handset / Base unit
1
Proceed with the operation for your unit.
Handset: MCN CID
Base unit: MCIDN
2
MbN: Select the desired entry.
3
MERASEN a MbN: "Yes" a MSELECTN
4
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Erasing all caller information
Handset / Base unit
1
Proceed with the operation for your unit.
Handset: MCN CID
Base unit: MCIDN
2
MERASEN a MbN: "Yes" a MSELECTN
3
Handset: MOFFN
Base unit: MEXITN
For assistance, please visit http://shop.panasonic.com/support
KX-TG954x_955x_OI(en)_0507_ver432.pdf 49
Caller ID Service
49
2018/05/07 14:00:44