Table of Contents
Advertisement
8
www.aeg.com
Level of protection against ingress of solid particles and
moisture ensured by the protective cover, except where
the low voltage equipment has no protection against mois‐
ture
Water supply pressure
1)
Water supply
Maximum Load
Spin Speed
1) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot
connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your do‐
mestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the
appliance inlet hose and the bottom of the water storage tank.
2) Connect the water inlet hose to a water tap with a 3/4'' thread.
5. INSTALLATION
WARNING!
Refer to Safety chapters.
5.1 Be prepared for installation
It is recommended that
installation is carried out by
two persons.
Minimum
Maximum
2)
Cotton
Maximum spin speed
IPX4
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
Cold water
8 kg
1351 rpm
5.2 The appliance is equipped
with ...
A
B
C
x4
x2
x1
F
G
x1
x2
x1
x2
D
E
x1
x1
H
L
x1
x1
Advertisement
Table of Contents
