Advertisement
Remote Control User Guide
Connecting the Remote Control to Helios
Plug the Remote Control cable connector to the socket on the Receiver.
Cut the Keypad/Dallas connector on the Helios wire harness and connect the
wires to the Remote Control cable the following way:
Connect the
RED
wire from the Remote Control cable to
RED
wire on the Helios
wire harness (Keypad/Dallas).
Connect the BLACK wire from the Remote Control cable to BLACK wire on the
Helios wire harness (Keypad/Dallas).
Connect the
GRAY
wire from the Remote Control cable to the BLUE/WHITE
wire on the Helios wire harness (Keypad/Dallas).
The
GREEN
wire from the Remote Control cable is not used.
2
Advertisement
Need help?
Do you have a question about the Helios Track&trace and is the answer not in the manual?
Questions and answers