Advertisement
6. To safely power off device during stimulation, you
may long press the power button on the host device
for 3 seconds. Replace protective film over electrodes
to store.
Note: Control unit compatible with all Omega Wireless
Pads.
Unit Storage & Maintenance
• Use a damp cloth with mild soap to gently wipe down
and clean the unit.
Note: This unit has water detection technology. Do not
• expose or submerge this unit in water or any other
liquids. Water damage to the device or its components will
void the warranty.
• This unit should be operated, transported and stored at
temperatures between 50° F and 104° F (10° C and 40°
C), with relative humidity between 30% - 85%. All values
have+/- 10% tolerance.
• Store the device, remote control, and electrodes in
original packaging between stimulation sessions.
• Immediately discontinue use if the device is not working
proerly. Do not modify or disassemble this unit.
Technical Specifications
Product Model: OMEGA
6
Product Name: Wireless TENS
Working Mode: 6 modes
Working Strength: 20 levels
Output Current: 40mA
Power Voltage: 3.7V
Pulse Frequency: 110Hz
Pulse Width: 100μs
Timer Control: 10-60 minutes
Power Supply: DC 3.7V lithium battery
What Does TENS Stimulation Feel Like?
Users may experience different sensations with Omega
Wireless stimulation. Most users will feel a slight tingling
sensation and the feeling of being warmed or
massaged on and around the pain area. Small
contractions of muscles are not uncommon, but the
Omega Wireless works best at a level of intensity where
pain relief is achieved but before muscles begin to
contract.
You may notice that while this unit maintains a steady
intensity, the pulsation pattern will vary to achieve the
maximum effectiveness during stimulation.
Learn More!
Please visit www.Tensunits.com for further
information. For Questions, please contact us by phone
at: 1-866-237-4013 or email us at cstu@TensUnits.com
7
Advertisement
