Advertisement
Device Setup
1. Prepare the pain area with a thorough washing and
drying of the skin. The targeted pain area must be clear of
any dirt and excess oils to proceed. Do not use electrode
pads on damaged skin.
2. Connect electrode pads with the wireless device and
place pads on desired pain location. Do not activate
device before placing electrodes.
3. The unit is now ready for use. It is recommended that
this unit be charged for more than ten hours after the
power supply is depleted to prolong the life of the built-in
lithium ion battery. Unplug charger from power outlet when
charging is complete. DO NOT operate this device while it
is charging.
4
Proper Usage Guidelines
1. Peel and remove the clear protective film placed over
each electrode pad. Retain the protective film strips as
they must be reapplied to the electrodes to store them
after use. Do not touch or allow any object or surface to
come in contact with the electrodes as this can cause the
adhesive to lose its grip.
2. Place the device over the desired pain area. Ensure that
the electrodes are in contact with the skin.
3. Press the power button on the Wireless host. Blue lights
will activate.
There are 6 modes in the unit. If no modes selecting within
2 minutes after starting up, it will automatically shut down.
4. Stimulation will automatically stop after 30 minutes if
have no setting time action. Stimulation can be stopped at
any time by pressing power button. DO NOT attempt to
remove the device from the body during stimulation.
5. Set the Mode. Press the power button shortly on the
host device and then select the mode. For safety, when
the mode is changed, the intensity will automatically
decrease to the lowest setting. To Change the Intensity.
Press the "+" to increase intensity or the"-" button to
decrease intensity.
5
Advertisement
