Page 1
CD RDS RECEIVER AUTORADIO CD RDS REPRODUCTOR DE CD CON RECEPTOR RDS DEH-S1200UB Operation Manual Mode d’emploi Manual de operación Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
Page 2
Table of Contents Getting Started ..................3 Radio ......................7 CD/USB/AUX..................... 8 Using Pioneer ARC APP ............... 10 Settings ....................12 FUNCTION settings ................12 AUDIO settings ..................13 SYSTEM settings ..................14 ILLUMINATION settings................ 14 Additional Information ............... 16 About this manual: •...
Page 3
Getting Started Basic operation DEH-S1200UB BASS USB port M.C. (multi-control) dial (eject) SRC (source)/OFF Disc loading slot DISP (display) Detach button Display window AUX input jack (3.5 mm stereo jack) BAND/ Remote Control VOLUME +/– MUTE FUNCTION AUDIO SRC (source)
Page 4
Frequently used operations Operation Purpose Head Unit Remote Control Turn on the power* Press SRC/OFF to turn on Press SRC to turn on the the power. power. Press and hold SRC/OFF to Press and hold SRC to turn turn off the power. off the power.
Page 5
Detaching the front panel Detach the front panel to prevent theft. Remove any cables and devices attached to the front panel and turn off the unit before detaching it. Detach Attach Important • Avoid subjecting the front panel to excessive shock. •...
Page 6
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. • Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine, fire or the like. CAUTION •...
Page 7
Turn the M.C. dial to select [DEMO OFF], then press to confirm. Turn the M.C. dial to select [YES], then press to confirm. INITIAL settings Press and hold SRC/OFF until the unit turns off. Press the M.C. dial to display the main menu. Turn the M.C.
Page 8
Receiving preset stations Press SRC/OFF to select [RADIO]. Press BAND/ to select the band from [FM1], [FM2], [FM3] or [AM]. Press a number button (1/ to 6/ buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the FUNCTION settings (page 12).
Page 9
Insert a disc into the disc loading slot with the label side up. To eject a disc, stop playback first then press USB devices (including Android™) Open the USB port cover. Plug in the USB device using an appropriate cable. NOTE To automatically switch to [USB] source when a USB device is connected to the unit, set [USB AUTO] to [ON] in the SYSTEM settings (page 14).
Page 10
Using Pioneer ARC APP You can operate the unit from Pioneer ARC APP installed on an Android device. In some cases, you can control aspects of the application, such as source selection, pause, etc., by using the unit.
Page 11
Pioneer ARC APP on the device starts automatically. NOTE If Pioneer ARC APP has not been installed on your Android device yet, a message that prompts you to install the application will appear on your Android device. Select [OFF] in [P.APP AUTO ON] to clear the message (page 14).
Page 12
Purpose Operation Pause/resume playback Press 4/PAUSE. Settings You can adjust various settings in the main menu. Press the M.C. dial to display the main menu. Turn the M.C. dial to select one of the categories below, then press to confirm. •...
Page 13
AUDIO settings Menu Item Description FADER*1 Adjust the front and rear speaker balance. BALANCE Adjust the left and right speaker balance. EQ SETTING [SUPER BASS], [POWERFUL], Select or customize the equalizer curve. [DYNAMIC], [NATURAL], [VOCAL], [CUSTOM1] can be set separately for each source. [VIVID], [CUSTOM1], [CUSTOM2], However, each of the below combinations are set [FLAT]...
Page 14
Select the appropriate connection method for an Android device. P.APP AUTO ON [ON], [OFF] Select [ON] to automatically launch Pioneer ARC APP when an Android device is connected to the unit via AOA. (Not available when [MEMORY] is selected in [ANDROID WIRED].)
Page 15
Menu Item Description BRIGHTNESS [1] to [10] Change the display brightness. The available setting ranges differ depending on [DIM SETTING]. - 15 - - 15 -...
Page 16
– Turn the ignition switch OFF and back → The inserted disc contains DRM to ON again. If the message remains, protected files. contact your dealer or an authorized – The protected files are skipped. Pioneer Service Station for assistance. - 16 -...
Page 17
– Check that the USB connector or USB PROTECT cable is not caught in something or → All the files on the inserted disc are damaged. embedded with DRM. → The connected USB device consumes – Replace the disc. more than maximum allowable current. –...
Page 18
Using such discs may result CAUTION in damage to this equipment. • Do not attach commercially available • Pioneer cannot guarantee compatibility labels or other materials to the discs. with all USB mass storage devices, and – The discs may warp making the disc assumes no responsibility for any loss of unplayable.
Page 19
Sampling frequency 8 kHz to 48 kHz (32 File system ISO 9660 Level 1 and kHz, 44.1 kHz, 48 kHz 2, Romeo, Joliet for emphasis) Multi-session Compatible Compatible ID3 tag 1.0, 1.1, 2.2, 2.3, 2.4 playback version (ID3 tag Version 2.x is Packet write data Not compatible given priority over...
Page 20
Example of a hierarchy – Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or Folder promote products derived from this Compressed software without specific prior written audio file permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS”...
Page 21
Maximum current supply: 1.5 A Chassis: 178 mm × 50 mm × 165 mm USB Protocol: (7 in. × 2 in. × 6-1/2 in.) MSC (Mass Storage Class) Nose: 170 mm × 46 mm × 17 mm (6- MTP (Media Transfer Protocol) 3/4 in.